SRS Light By-Pass (Recaro Seat Conversions Only)
Say goodbye to the SRS Light after removing the stock seats! By installing this resistor on the Seat Airbag Plug. You are going to fool the system by making it think there's an airbag in place!
This hack will shut off the SRS light after a system reset! (SRS reset videos on YouTube).
Keep in mind, this will not fix a faulty system. This only works for RSX models that have Recaro Seats without built in airbags!
**WARNING: There is some wiring involved with this modification. If you aren't skilled to take on this project. Please do not proceed.
OPTIONAL: If you're also removing the stock seat belt tensioner system you can install a resistor there as well to complete the circuit.
To keep your "No Seat Belt Buckled or Seat Belt Switch" Light or Beep from coming on, simply do the following:
- STEP 1: You will need to remove the dash light lead (center lead - blue/red tracer)
- STEP 2: Jump the SRS lead (left lead - red/blue tracer) to ground (black).
that will complete the circuit and your light won't flash or won't come on when you're not wearing the seat belt. Don't confuse this with your SRS light!
IF YOU'RE KEEPING YOUR STOCK BELT BUCKLE TENSIONER IGNORE THE OPTIONAL SECTION.
Quantity: 1 (4x Resistors)
Fitment: 2002/06 Acura RSX All Models
We are not responsible for any issues you may encounter by removing your seat airbag. We strongly recommend that you do a lot of research and disconnect the battery BEFORE attempting this mod. We are not liable for anything. Do this at your own risk.
Estimated Shipping Within 2 Weeks!